|
Height
|
150 mm
|
|
Weight
|
1268 gm
|
|
Breadth
|
255 mm
|
|
Length
|
116 mm
|
|
Sound pressure level
|
27 dBA with uncertainty of 2 dBA
|
|
Standard air filter
|
Material: Polyester non woven fibre Average arrestance: >75% for ~7 micron dust
|
|
Aircraft use
|
ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21, category M) for all phases of air travel.
|
|
Modes
|
CPAP, S, T, ST with optional iBR, PAC, iVAPS with iBR and optional Auto EPAP
|
|
Water capacity
|
To maximum fill line 380 mL
|
|
Sensors
|
Pressure sensor: Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
|
|
Maximum single fault steady pressure
|
Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec.
|
|
Housing construction
|
Flame retardant engineering thermoplastic
|
|
Cleanable humidifier
|
material: Injection moulded plastic, stainless steel and silicone seal
|
|
Operating pressure range
|
S, ST, T, PAC, iVAPS: 2 to 25 cm H2O (2 to 25 hPa) CPAP 4 to 20 cm H2O (4 to 20 hPa)
|
|
Operating temperature/ humidity/altitude
|
+5°C to +35°C / 10 to 95% relative humidity, non-condensing / Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
|
|
Storage and transport temperature/humidity
|
-20°C to +60°C / 5 to 95% relative humidity, non-condensing
|
|
Supplemental oxygen
|
Maximum flow: 15 L/min (S, ST, T, PAC, CPAP), 4 L/min (iVAPS)
|
|
Air outlet
|
(complies with ISO 5356-1:2004): 22 mm
|
|
Electromagnetic compatibility
|
requirements (EMC) according to IEC 60601-1-2:2014, for residential, commercial and light industry environments. It is recommended that mobile communication devices are kept at least 1 m away from the device.
|
|
IEC 60601-1:2005+A1:2012 classification
|
Class II (double insulation), Type BF, Ingress protection IP22
|
